|Component||Express Qty||XL Qty|
|Gantry Main Beam (1200mm long)||1||2|
|40mm Horizontal Cable Carrier Support||4||8|
|M5 x 10mm Screw||8||16|
|40mm Nut Bar||4||8|
Step 1: Mount the cable carrier supports
Mount four 40mm horizontal cable carrier supports into the middle slot of the gantry main beam using eight M5 x 10mm screws and four 40mm nut bars. The supports should be spaced as shown in the drawing below.
Step 2: Repeat (for XL only)
Repeat step 1 to create a second gantry main beam with attached cable carrier supports.