Specs

material	Aluminum
Surface finish	Sand blasted and clear anodized
Price	$0.50
Quantity	Express - 6 Express XL - 6
Purchase	The FarmBot Shop
internal part name	Belt Sleeve
rev	A
vendor	LDO
cost	$0.25

Component tests

Test	Description	Target	Tolerance
Inner width	Measure using digital calipers.	7.5mm	+/- 0.1mm
Inner height	Measure using digital calipers.	2.15mm	+/- 0.05mm
Belt fit	Assemble the belt sleeve with a belt and belt clip.	The belt sleeve should fit snugly over the two belt sections and provide adequate holding force.	N/A
Outer width	Measure using digital calipers.	10mm	+/- 0.2mm
Outer height	Measure using digital calipers.	5mm	+/- 0.2mm
Length	Measure using digital calipers.	10mm	+/- 0.5mm
Material	Ensure the material is aluminum and will not rust by holding a magnet to the part.	Aluminum (no magnetic attraction)	N/A
Sandblasting	Inspect for thorough sandblasting coverage.	100%	-1%
Anodization	Inspect for thorough annodization coverage.	100%	-1%
Deburred	Inspect for burrs.	No burrs	0