Express Express XL
Part Notes Price Cost Qty Subtotal Subtotal Qty Subtotal Subtotal
3 in 1 Tool Head Rev B --- $20.00 $2.30 1 $20.00 $2.30 1 $20.00 $2.30
Cable Carrier Spacer Block - 30mm Rev A New part, machined delrin $3.00 $0.70 1 $3.00 $0.70 1 $3.00 $0.70
Horizontal Cable Carrier Support Rev A --- $3.00 $0.75 4 $12.00 $3.00 8 $24.00 $6.00
Vertical Cable Carrier Support Rev A New part, needs new injection mold $3.00 $0.78 4 $12.00 $3.12 4 $12.00 $3.12
Camera Mount Half Rev A --- $3.00 $1.05 2 $6.00 $2.10 2 $6.00 $2.10
Gantry Plate Spacer Block Rev A --- $8.00 $1.60 2 $16.00 $3.20 2 $16.00 $3.20
Horizontal Motor Housing Rev A --- $8.00 $1.28 3 $24.00 $3.84 3 $24.00 $3.84
Seed Trough Holder Rev B --- $8.00 $1.76 1 $8.00 $1.76 1 $8.00 $1.76
Seed Trough Rev A --- $3.00 $1.10 2 $6.00 $2.20 2 $6.00 $2.20
Solenoid Valve Mount Rev A --- $6.00 $1.43 1 $6.00 $1.43 1 $6.00 $1.43
Vacuum Pump Housing Rev A --- $15.00 $3.85 1 $15.00 $3.85 1 $15.00 $3.85
Vacuum Pump Mount Rev B --- $6.00 $2.09 1 $6.00 $2.09 1 $6.00 $2.09
Vertical Motor Housing Rev C New revision, needs new injection mold $10.00 $1.83 1 $10.00 $1.83 1 $10.00 $1.83
TOTAL 24 $144.00 $31.42 28 $156.00 $34.42

Component tests

Size and shape

Test Description Target Tolerance
Overall size Measure the overall length, width, and height with digital calipers. See spec in CAD models. +/- 0.5mm
M3 hole size Measure the diameter of M3 holes using digital calipers. 3.25mm nominal +/- 0.1mm
M5 hole size Measure the diameter of M5 holes using digital calipers. 5.25mm nominal +/- 0.1mm
Injection completeness Inspect part to ensure injection process completed without air pockets. 100% - 1%
Shrink Inspect part for shrinkage. No shrunken spots Minor shrink on non-critical faces is permissible
Ejector pins Inspect ejector pin sites for dimensionally significant artifacts. 0mm deviation from intended shape +/- 0.2mm

Material and appearance

Test Description Target Tolerance
Color Inspect parts for discoloration. See part spec N/A
Surface texture Inspect for thorough texture coverage on applicable surfaces. 100% - 1%

Function

Test Description Target Tolerance
Brass inserts Check for presence and size of brass inserts. All inserts must be present and of the correct threads and depth. N/A
M3 screws Insert M3 screws into M3 holes to ensure fit. Screws should be insertable without interference. N/A
M5 screws Insert M5 screws into M5 holes to ensure fit. Screws should be insertable without interference. N/A
Nut bars Fasten nut bars of appropriate lengths between holes according to FarmBot system design. Nut bars should be fastenable without screw/hole interference. N/A
Extrusion fit Fasten part to an extrusion according to FarmBot system design. Part should mate with extrusion slot as intended. N/A
Cable carrier fit Fasten cable carrier end pieces to cable carrier supports. End pieces should fasten flush to mounting surface and have adequate clearance on sides. N/A
Vacuum pump fit Fasten together the vacuum pump, vacuum pump mount, vacuum pump housing, and the z-axis extrusion according to the FarmBot system design. The vacuum pump and mount should fit inside the housing without interference. N/A