Common specs

light color White 6000K
lead length 0.7m
cable 22/2 Stranded Copper, Red and Black cores
cable color Black
connector Black 2-pin plug (Molex 50579402)
heatshrink label LED
Purchase The FarmBot Shop
notes New connector on Farmduino end, see drawing. LED strip should NOT have an adhesive backing. Cut end must be dipped in silicon to seal.

Variant specs

LED Strip - 1.2m

strip length 1.2m
Price $20.00
Quantity - Express 1
Quantity - Express XL 0
internal part name LED Strip - 24V, 1.2m (Express)
rev A
cost $6.60

LED Strip - 2.4m

strip length 2.4m
Price $40.00
Quantity - Express 0
Quantity - Express XL 1
internal part name LED Strip - 24V, 3.0m (Express XL)
rev A
cost $12.00

Component tests

Test Description Target Tolerance
Connector Connect the LED strip to a Farmduino peripheral plug. Part should connect as expected N/A
Cable color Inspect the color of the cable. Black N/A
Cable length Measure the length of the cable using a measuring tape. 0.7m +/- 20mm
Heatshrink label Inspect the label near the connector. LED N/A
LED color Turn on an LED strip and inspect the color of the light. Cool white (6000K) N/A
LED strip length Measure the length of the LED strip using a measuring tape. See BOM spec +/- 30mm
LED strip cut end Inspect the cut end of the LED strip. Cut end should be sealed with silicon rubber N/A
Double-sided tape Inspect the LED strip for double-sided tape. The part should not have any tape or other adhesives along its length N/A