| Length |
Measure the cable’s length using a tape measure. |
See BOM spec |
+/- 3cm |
| Diameter |
Measure the cable’s diameter using digital calipers. |
6mm |
+/- 1mm |
| Cable |
Inspect cable spec. |
18AWG-3C stranded copper cable |
N/A |
| Connector 1 |
Connect the cable’s screw-together connector to the power supply. |
Should connect |
N/A |
| Connector 2 |
Inspect the connector type. |
Should be a 3-pin plug (Molex 2004561213 |
N/A |
| Cable carrier fit |
Insert the cable and a water tube through the X-axis cable carrier (including through the end pieces). |
Should fit |
N/A |
| Electronics box fit |
Insert the cable and connector 2 through the slot in the bottom of the electronics box and then insert the supergland. |
Should fit |
N/A |
| Farmduino fit |
Connect the cable to the Farmduino’s 24V POWER IN connector. |
Should connect and power the board |
N/A |
| Color |
Inspect the part’s colors. |
Black cable
Black Molex connector |
N/A |
