Specs

Inlet	3/4" NPT (National Pipe Thread)
Outlet	3/4" NPT (National Pipe Thread)
Operation	Normally closed
Working Pressure Range	0.02 to 0.8 Mpa (3 to 116 PSI)
Flow Direction	One-way, indicated by an arrow molded into the plastic
Input Voltage	24V
Current Draw	160mA
Power Consumption	3.84 watts
Electrical Tabs Direction	Facing towards the inlet
Price	$15.00
Quantity	Express - 1 Express XL - 1
Purchase	The FarmBot Shop
internal part name	Solenoid Valve - 24V, 3/4" NPT
cost	$2.60

Component tests

Test	Description	Target	Tolerance
Threads	Screw an NPT to barb adapter (with rubber gasket) onto the inlet. Connect a tube to the barb and pressurize the system with municipal water.	Adapter should thread on as expected and the system should hold water without leaking.	N/A
Voltage	Connect the solenoid valve to a Farmduino and test operation.	Opens and does not get hot with 24V input	+/- 3V
Terminal size	Connnect a solenoid valve cable.	The cable’s connectors should connect to the terminals as expected	N/A
Terminal direction	Inspect the direction the terminals face.	Terminals should face the inlet	N/A
Normal state	Try to blow air through the solenoid valve when it is unplugged/inactive.	Air should not pass through (the valve should be closed)	N/A
Pressure Range	Inspect the label on the solenoid valve for the working pressure range.	0.02 to 0.8 Mpa (3 to 116 PSI)	N/A