Z Vacuum Pump Cable
This cable is the Z-axis portion of a 2-part cable that connects the vacuum pump to the Farmduino.
Specs
cable | Shielded 18AWG-2C |
length | 1.0m |
rated voltage | 300V |
inner colors | Red and black |
outer color | Black |
heat shrink color | Gray |
end 1 | 4-pin waterproof screw together 90 degree plug |
end 2 | Three 3/16" insulated quick-connect terminals |
Price | $12.00 |
Quantity |
Express - 1
Express XL - 1 |
Purchase | The FarmBot Shop |
internal part name | Vacuum Pump Cable - Z, 1.0m (Express and Express XL) |
rev | B |
cost | $4.50 |
notes | New connector on Farmduino end, see drawing. Must perform a continuity check at factory |
Component tests
Test | Description | Target | Tolerance |
---|---|---|---|
Connectors and continuity | Use the cable to connect a vacuum pump to a Farmduino. | The cable’s connectors should connect as expected and the vacuum pump should be operable. | N/A |
Length | Measure the length of the two sections of cable using a tape measure. | See BOM spec | +/- 20mm |
Cable | Inspect the cable’s spec. | 18 gauge, 2 core | N/A |
Shrinkwrap | Inspect the color of the shrinkwrap. | Gray | N/A |
Color | Inspect the color of the cable. | Black outer, black and red inner | N/A |